Hi

recently bought a used TSU-2000, and start programming through ProntoEdit4 using templates and CCF's found on file section.

My problem is that remote beeps every time i press a key (on LCD or Hard Button)

It's possible to disable it? Try to search on forum, FAQ and on manual, but didn't find a solution.

Thanks in advance

Regards
Paolo from Italy

Hold your finger on the Icon of the Pronto to get into the setup screen and you will find a place for setting the beep volume for both. Just keep reducing it and it will then turn off.

Thank You very much for fast reply

Another question:

There is some function that permit to return to previous screen?

Edit: I've found the trick to do, thanks ;)

This message was edited by HDTV_Italy on 10/25/05 11:05 ET.

Not directly, although newer versions of the remote have this capability.

There is a way to do it using the macro side. If you place a page in a macro group (macro side) and jump to it, you can then press the device menu (upper right corner) and you will be taken back to the last page you were at on the device side. Works great, however it won't be obvious to any user other than yourself.

Thanks bomberjim

I've found an old thread that explain this trick, very useful.