| Post 1 made on Tuesday March 15, 2005 at 10:16 |
Hi,
Is there a discrete code for the speaker A/B selection for the Sony STRDB2000 receiver? The ideal codes would be A only, B Only & both.
I've downloaded a load of CCF's, but can't find the codes.
Thanks for any help.
|
|
| Post 2 made on Tuesday March 15, 2005 at 23:39 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
13,006 |
|
|
Check here to see if the function codes exist. From here, you can use MakeHex to generate a complete set of function codes for your device. [Link: hifi-remote.com]
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| OP | Post 3 made on Wednesday March 16, 2005 at 06:18 |
Thanks for the link.
Looks like the codes exist 64 & 66 under device code 24. If I understand correctly, this will use the Sony12 IRP file? What device file should I use for codes that are under the Sony:12;(44) table
|
|
| OP | Post 4 made on Wednesday March 16, 2005 at 06:18 |
Thanks for the link.
Looks like the codes exist 64 & 66 under device code 24. If I understand correctly, this will use the Sony12 IRP file? What device file should I use for codes that are under the Sony:12;(44) table
|
|
| Post 5 made on Wednesday March 16, 2005 at 22:17 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
13,006 |
|
|
In the Sony12.irp file specify
Device=24
Function=0..127
From a command prompt, Run makehex sony12.irp and then open Sony12.hex and copy the hex data for Functions 64 and 66.
That's it. Now wasn't that simple?
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
