I build a custom hub room that small enough to stack all gears into the racks. I plan to get Pronto TSU 3000 and the RF extender since it is about 30 feet away from my Theater room. My question is since all these gears are stack horizontally therefore I do not have any distance that I can put this RF extender away and aim it to all gears. I plan to put this extender into one of the rack shelf. Now my questions are:

1) How can this extender send the signal to each component's front face?

2) Is TSU 3000 a good remote? Where can I find a good deal?

3) Any other remote that you can suggest me? Prefer touch screen display.

Thanks a lot for your suggestion in advance.

1) The extender has RF Emitters that plug into it and can stick on the front panel of your equipment.

2) 3000 questions should be directed to the NG forum.

To add to what Lyndel said, there are eight emitters, 2 on each of 4 cords, splitting the emitters and cord length shouldn't be a problem, so you can control 8 pieces of gear.

Jim L

Or you could do this......

Go to wal mart or other stores. And buy a mirror that can fit on the other side of the room, closet or whatever you have that will be facing the gear. There for reflecting the ir from the extender to the rack of gear.

Rob