| Post 1 made on Wednesday February 18, 2004 at 14:13 |
John Beck Lurking Member |
Joined:
Posts: | February 2004
2 |
|
|
My pronto refuses to learn IR codes from my remotes.
I've loaded and the reloaded the latest Sys and App and I'm using Version 4 of ProntoEdit.
I can upload and download the configuration into my Pronto so the serial connections must be OK.
Any suggestions?
Thanks.
|
|
| Post 2 made on Wednesday February 18, 2004 at 15:31 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,875 |
|
|
The most common cause for this is that you end p pointing the remotes in the wrong direction. the head of the OEM remote needs to point at the tail of the Pronto (i.e. you should be able to read the buttons on the Pronto and the buttons on the OEM remote).
|
... |
|
| OP | Post 3 made on Thursday February 19, 2004 at 10:25 |
John Beck Lurking Member |
Joined:
Posts: | February 2004
2 |
|
|
Gee, I'm embarassed. I haven't needed to do any programming on my Pronto for 3 years. I forgot the IR receive port is on the bottom.
Thanks for getting me back on track. It's working fine.
Duh.
|
|
| Post 4 made on Thursday February 19, 2004 at 10:31 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,875 |
|
|
no problem, like I said very common thing to do
|
... |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
