| Post 1 made on Thursday June 5, 2003 at 21:20 |
I have Pronto Pro and am having trouble making it learn any codes. I have tried different remotes but all have failed. I have attempted to do it in the dark, replaced batteries and at differing distances. I am pointing the two remotes at each other and have tried holding down the button to learn and the press and release method. Nothing seems to be working. Everything else on the Pronto works fine. I have 1.4 sys and apps installed. Is there something dumb I am missing? And yes I am putting the Pronto into learn mode and pressing the button to be learned.
|
|
| Post 2 made on Thursday June 5, 2003 at 21:47 |
King of typos Loyal Member |
Joined:
Posts: | June 2002
5,281 |
|
|
One thing that you did not mentioned. Is where on the pronto are you pointing the oem remote at?
I don't know off hand where on the pro is the ir receiver. But check the owners manual and you'll find it out.
Rob
|
|
| Post 3 made on Thursday June 5, 2003 at 22:44 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
You are probably trying to learn from the wrong end of your Pro.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 4 made on Monday June 9, 2003 at 13:15 |
Yup, that was it, once I checked the manual I saw I was pointing it at the wrong end. Thanks for the help.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
