Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Parasound P/LD1100 code ...
This thread has 8 replies. Displaying all posts.
Post 1 made on Tuesday April 22, 2003 at 04:55
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
Hello,
I just buy a TSU2000 and I'm looking for the code (ccf) to make it run a Parasound P/LD1100 preamplifier ... (original remote is broken)
If someone could send me this code it would be very helpfull

Thanks in advance

thierrywebs@hotmail.com
OP | Post 2 made on Saturday May 3, 2003 at 17:24
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
It's me again !!

I will be very happy if someone could learn the code from the Parasound preamplifier and send it to me or post it on the files section.

Many thanks
OP | Post 3 made on Friday June 6, 2003 at 05:45
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
Hello,

I always looking for the CCF code of the Parasound P/LD1100 ....

If someone can do something for me it would be great !!

Thanks in advance
Post 4 made on Friday June 6, 2003 at 11:12
johnsfine
IR Expert
Joined:
Posts:
September 2002
5,159
There are 4 commands for that device here:



I hope you know how to copy/paste those into ProntoEdit.

Try them out and see if they work. They're strange looking codes, so I'm not convinced they're valid. But if those 4 work I can probably figure out how to find or construct the rest of the commands.
OP | Post 5 made on Friday June 6, 2003 at 15:43
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
Many thanks !!! It work !! I've just try 2 codes and I go to see if it's possible to do some more ...

I will do a CCF file and put it in the file section.

Kind regards

Thierry
OP | Post 6 made on Saturday June 7, 2003 at 18:25
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
Little problem ... there is only two code who are OK !! (volume up and down, it's better than nothing !)

And it doesn't seem's to be standard IR codes !!
Code are the same as the Parasound TDQ-1600 tuner, than if someone has this tuner, could he please send the IR code ... or if someone has another solution I'm ready to test.

Thierry
Post 7 made on Saturday June 7, 2003 at 23:58
John Pechulis
Loyal Member
Joined:
Posts:
July 2001
7,127
TDQ-1600 codes:

POWER:

0000 006d 0006 0000 0155 0056 0056 00ab 0156 0156 0156 0055 0055 00ac 0155 0056

DIRECT:

0000 006d 000a 0000 0155 0056 0056 0055 0056 0055 0055 0055 0056 0156 0156 0055 0055 0055 0056 0055 0055 0056 0055 0056

AUTO:

0000 006d 0006 0000 0156 0056 0055 0157 00ab 0156 0155 0055 0056 0156 00ab 0056

FM/AM:

0000 006d 0008 0000 0155 0056 0101 0055 0055 0055 0056 0156 0156 0055 0100 0055 0055 0056 0055 0056

PRESET NEXT:

0000 006d 0008 0000 0156 0056 0055 00ac 00ab 0055 0056 0156 0155 0055 0056 00ab 00ab 0055 0056 0056

TUNER:

0000 006d 0006 0000 0155 0056 0056 0055 01ab 0156 0156 0055 0055 0055 01ab 0056

CD:

0000 006d 0004 0000 0156 0056 0255 0156 0156 0055 0256 0056

TAPE:

0000 006d 0006 0000 0156 0056 0100 00ac 00ab 0156 0155 0055 0101 00ab 00ab 0056

AUX:

0000 006d 0008 0000 0155 0056 0056 0055 0056 00ab 00ab 0156 0156 0055 0055 0055 0056 00ab 00ab 0056

VIDEO:

0000 006d 0006 0000 0156 0056 00ab 0101 00ab 0156 0155 0055 00ab 0101 00ab 0056

TUNE +:

0000 006d 0000 0006 0156 0056 0100 0055 0100 0156 0156 0055 0100 0055 0101 0c0b

TUNE -:

0000 006d 0000 0008 0156 0056 0055 0056 0055 0055 0101 0156 0155 0055 0056 0055 0056 0055 0100 0c0c

VOLUME+:

0000 006d 0001 0006 00c6 0c0b 0156 0055 00ab 00ab 0101 0156 0155 0055 00ab 00ac 0100 0c0c

VOLUME-:

0000 006d 0000 0006 0156 0056 0055 0101 0100 0156 0156 0055 0055 0101 0101 0c0b

MUTE:

0000 006d 0008 0000 0156 0056 0055 0056 0100 0055 0056 0156 0155 0055 0056 0055 0100 0055 0056 0056

POLARITY:

0000 006d 0006 0000 0156 0056 01ab 0055 0056 0156 0155 0055 01ab 0055 0056 0056

PRESET KEY 1:

0000 006d 0008 0000 0155 0056 00ab 00ac 0055 0055 0056 0156 0156 0055 00ab 00ab 0055 0056 0055 0056

PRESET KEY 2:

0000 006d 0008 0000 0156 0056 0055 0101 0055 0056 0055 0156 0156 0055 0055 0101 0056 0055 0055 0056

PRESET KEY 3:

0000 006d 0006 0000 009f 0056 0156 00ab 0056 0156 0155 0055 0156 00ab 0056 0056

PRESET KEY 4:

0000 006d 0008 0000 0156 0056 0055 0055 00ab 00ac 0055 0156 0156 0055 0055 0056 00ab 00ab 0056 0056

PRESET KEY 5:

0000 006d 0008 0000 0156 0056 00ab 0055 0055 00ac 0055 0156 0156 0055 00ab 0055 0056 00ab 0056 0056

PRESET KEY 6:

0000 006d 0008 0000 0155 0056 0056 00ab 0056 00ab 0056 0156 0156 0055 0055 00ac 0055 00ac 0055 0056

PRESET KEY 7:

0000 006d 0006 0000 0155 0056 0101 0100 0056 0156 0156 0055 0100 0101 0055 0056

PRESET KEY 8:

0000 006d 0008 0000 0156 0056 0055 0055 0056 0101 0055 0156 0156 0055 0055 0056 0055 0101 0056 0056

PRESET KEY 9:

0000 006d 0006 0000 0156 0056 00ab 0156 0055 0156 0156 0055 00ab 0156 0056 0056

PRESET KEY 10:

0000 006d 0006 0000 0156 0056 0055 01ad 0055 0156 0156 0055 0055 01ad 0056 0056

PRESET KEY 10+:

0000 006d 0008 0000 0156 0056 00ab 0055 00ab 0055 0056 0156 0155 0055 00ab 0055 00ab 0055 0056 0056

Hope that does it!

JJP
Post 8 made on Sunday June 8, 2003 at 07:19
johnsfine
IR Expert
Joined:
Posts:
September 2002
5,159
On 06/07/03 23:58, John Pechulis said...
TDQ-1600 codes:

Hope that does it!

If it doesn't, ask again here and I'll try to figure something out.

Before this thread, I had never seen this protocol before. The link I posted had just 4 signals for one device and 6 for another. When I took a closer look (after you found two of them worked) that turned out not to be quite enough samples to deduce the system and generate more. I haven't taken a real look at the above samples yet. I once again expect it is enough to deduce the system and generate all the others (if necessary). But if you don't need them and I do that just to make my encode and decode tools more complete, it will be quite a while before I get around to it.
OP | Post 9 made on Sunday June 8, 2003 at 08:17
thierrywebs
Long Time Member
Joined:
Posts:
April 2003
14
Very nice, everything is OK with this code !!!
Many thanks, I was desperate to find something for this device ...

I immediatly post the CCF file

Many, many thanks ...

Kind regards


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse