Post 1 made on Sunday January 5, 2003 at 09:24 |
guillaume Lurking Member |
Joined: Posts: | January 2003 2 |
|
|
Hi, my Pronto neo refuses to learn one of my remote control. When I try to learn the remote control of my Panasonic PT-LC55E video projector my Pronto immediatly make an error beep and says "Failed". Learning other remote controls of my equipment worked fine... Can anyone help ? thanx
|
|
Post 2 made on Tuesday January 7, 2003 at 11:12 |
harmotten Long Time Member |
Joined: Posts: | November 2002 18 |
|
|
Try keeping the button on the original remote pressed and then press the button you want to learn on the NEO. If it fails try repeating several times. It worked fine for my Panasonic TV. Otherwise try to find a ncf file on this forum.
|
|
Post 3 made on Tuesday January 7, 2003 at 23:31 |
Twilight Long Time Member |
Joined: Posts: | December 2002 24 |
|
|
The method posted by harmotten is exactly what I had to do to learn my Panasonic DVD recorder's remote. Just make sure you keep the original remote pressed between fails!
|
|
OP | Post 4 made on Thursday January 9, 2003 at 12:59 |
guillaume Lurking Member |
Joined: Posts: | January 2003 2 |
|
|
Thanx guys, but that didn't work... But I saw a post saying to try in the dark. So I tried, and it worked !!! :)
|
|
Post 5 made on Saturday January 11, 2003 at 15:44 |
aamittle Lurking Member |
Joined: Posts: | January 2003 2 |
|
|
The pronto is a little fussy while learning. I usually have to do it in dim light and offset the remotesa little. The neo's learning interface appears to be in the left front corner of the unit.
|
|
Post 6 made on Monday January 13, 2003 at 05:03 |
sukij Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
HI..
Thank to harmotten...
Your method make Neo learn my Panasonics AE-300 and Mitsubishi Air-conditioner remote. But I have to press more than one hundred time, I think, before successfully finish the learning...
|
|
Post 7 made on Wednesday January 15, 2003 at 10:09 |
mijosil85 Lurking Member |
Joined: Posts: | January 2003 2 |
|
|
I'm having a problem with my Neo learning the remote for my Carver CT-7 preamp/tuner. I've tried the codes for preamps & tuners neither works. I've also tried making it learn, when I do that it says "ok" but when I go to use it, it still doesn't work. I've tried the learning process quite a few times with no luck. Has this happened to anyone else? Any suggestions will be appreciated.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.