Post 1 made on Saturday December 28, 2002 at 20:04 |
Nick Finney Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
Wondering if it's possible to increase the voltage going to the Neo, The sticker on the back says 6V however 3 AA alkalines in series only put out about 4.5 volts. With NIMH it gets even worse with only 3.6 volts. I am wondering if this might make the Backlight brighter. Any thoughts?
|
|
Post 2 made on Sunday December 29, 2002 at 16:05 |
allamand Founding Member |
Joined: Posts: | October 2001 513 |
|
|
Try it and let me know. I don't think it could hute much if inceased in small amounts.. but can't say for sure.
-steve
|
-steve |
|
Post 3 made on Sunday December 29, 2002 at 21:48 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,874 |
|
|
I know it would not work on the Pronto since the screen does not get power directly from the batteries.
what happens when the batteries are weak, does the backlight become dimmer, if not then stronger batteries will not help
|
... |
|
OP | Post 4 made on Monday December 30, 2002 at 16:51 |
Nick Finney Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
Yes you are probably right, It should have a small regulator to prevent over voltage. I am just curious as to why they have the 6V listed on the back. I don't have a power supply handy, but I can rig up an adjustable regulator to do some experimenting. May have a go with it anyway to see what happens. I will put a post here if I do it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.