Post 1 made on Wednesday December 25, 2002 at 17:13 |
Tim C. Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
I am new to this and have read many of the posts in this forum but was unable to come up with an answer. I am trying to define the brands of my devices, but the button is greyed out and in not acessible. I first place the Neo in "use mode" by holding down the "mode" button for three seconds. Then the options appear. Only "use", "label", and "setup" are available.
What am I doing wrong?
Tim
|
|
Post 2 made on Wednesday December 25, 2002 at 22:46 |
toolkit Long Time Member |
Joined: Posts: | December 2002 68 |
|
|
You are probably pressing MODE while on the start up page. You need to go to a device page first. For example, from the start page, press TV and then you will be on TV page 1. Now press and hold MODE.
If you enter the MODE screen from the start page, you won't be able to do Macro, Brand, or Learn because these are device specific (i.e. apply only to the TV or only to the VCR, etc).
|
|
Post 3 made on Wednesday December 25, 2002 at 22:47 |
howie777 Founding Member |
Joined: Posts: | November 2001 7 |
|
|
I had the same issue before. Those are the only options available at the "home" menu. If you select a device from the home menu then you also get Learn and Macro. So hit amp then hold mode for 3 seconds, that should work
|
|
OP | Post 4 made on Friday December 27, 2002 at 21:41 |
Tim C. Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
Thanks. I got it. Finally!!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.