 |
 |
|
|
Philips ProntoNEO Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Why "OTHER" isn't a device in ProntoNeo...
| |
|
| Topic: | Why "OTHER" isn't a device in ProntoNeo or Edit ??? This thread has 8 replies. Displaying all posts. |
|
| Post 1 made on Monday July 29, 2002 at 13:35 |
Why can't they have an OTHER learnable catagory on the TSU500 ProntoNEO that could learn any device ??? Then us folks with unlisted devices could use the remote to learn these units remotes. My old Sony RM-AV2100 remote would learn anything but you couldn't rename the buttons for that device>
Jerry
|
|
| Post 2 made on Monday July 29, 2002 at 15:20 |
allamand Founding Member |
Joined:
Posts: | October 2001
513 |
|
|
Not sure what you are talking about here...as the NEo can learn ANY other remote as is. MAybe if you explained a little more detail as to what the problem is, one could help you out..
-steve
PS. Most of my device were not in the Neo's ir datebase, but that doesn't matter, and I'd asume that they would be consided "Other" devices..
|
-steve |
|
| OP | Post 3 made on Monday July 29, 2002 at 16:01 |
Steve...I guess I'm just real confused ???
Example: When I go to TV on the ProntoNeo, then to learn, and then push the ON button of my Pronto it says learning. I push the ON button of my source remote, SANYO PROJECTOR ,and I get a failed response. I have tried going to NeoEdit on my PC and when I go to the properties of the TV button I get alot of brands of TV's. I pick different ones, including SANYO, and none of the IR codes work. I thought the IR codes had to be discrete for a brand or model.
Please help!!!
Jerry
|
|
| Post 4 made on Monday July 29, 2002 at 19:37 |
RWI Founding Member |
Joined:
Posts: | December 2001
592 |
|
|
Are you trying to learn while connected to the computer? If you are then dissconnect and learn as you would with any other remote, if you are not, do a search on this forum for learing and you will find lots info, the neo although a learing remote is stuborn with certain units, also you could check the files section, if you find configs with your devices you will have a least some if not all the codes you need.
|
|
| OP | Post 5 made on Monday July 29, 2002 at 19:51 |
No...not connected to PC. I just can't get the remote to learn a simple On and OFF command from my Sanyo pj remote . I used the Sanyo brand in the setup but no help. It does learn the MENU and SOURCE button from the remote but not ON and OFF.
Jerry
|
|
| Post 6 made on Monday July 29, 2002 at 20:51 |
allamand Founding Member |
Joined:
Posts: | October 2001
513 |
|
|
Have you tried different angles when tring to learn? I also found that some buttons would learn if I pressed the OEM remote FIRST, then the Neo button I wanted to learn to. My Technics amp took over 50 try's I'd say for a few buttons too.. and they would finnally take. Sometimes I would just pound away, and it would take.
HAve you tried the Sanyo code thats in the CCF files for the Pronto?
-steve
|
-steve |
|
| Post 7 made on Monday July 29, 2002 at 21:22 |
allamand Founding Member |
Joined:
Posts: | October 2001
513 |
|
|
Jerry, I sent you an Email with a NCF file attached. Hopefully it will give you on/off
The CCF file didn't have a button labled as on or off, but this looked to be it.
-steve
|
-steve |
|
| OP | Post 8 made on Monday July 29, 2002 at 22:29 |
Thanks Steve....I e-mailed you back saying it didn't work.....I don't know ???
Jerry
|
|
| Post 9 made on Tuesday July 30, 2002 at 02:09 |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
