Post 1 made on Wednesday February 1, 2006 at 20:33 |
deibud1815 Lurking Member |
Joined: Posts: | February 2006 5 |
|
|
I am using NEOHacker in hopes of editing the parameters for the key duration for some of my components. However, I'm not clear how that works. Any pointers as to how to proceed would be most welcome. It is currently set as... duration: 0;0
|
|
Post 2 made on Thursday February 2, 2006 at 13:59 |
tkrug Long Time Member |
Joined: Posts: | July 2002 435 |
|
|
I don't know what the numbers represent, but from what I've read, increasing the second digit increases the transmission length. I think the default is (0;0) and I've seen users have success with (0;30). But I think that is pretty long. The best solution is to try different numbers. If there is a particular code that gives you problems try starting with (0;5) and see if that helps. If not, increase it until it does. Then change the duration for any other keys you have trouble with.
When you experience code reception problems in a macro, keep in mind that sometimes a DELAY between commands may solve the problem as well.
|
-Tim Pronto Neo FAQ: [Link: remotecentral.com] |
|
OP | Post 3 made on Thursday February 2, 2006 at 19:36 |
deibud1815 Lurking Member |
Joined: Posts: | February 2006 5 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.