Post 1 made on Sunday December 16, 2007 at 18:18 |
aceman Lurking Member |
Joined: Posts: | February 2005 8 |
|
|
OK,
I've programmed several of these remotes (over 5) and all of a sudden whenever i try and learn IR from remotes not in the DB it seems like its totally hit/miss as to whether or not it works. Am i missing something? I just press learn, have the original remote a few inches away, press the button i want to learn, and when the MX says good, i stop.
Any suggestions would be appreciated.
Thanks,
Aceman
|
|
Post 2 made on Monday December 17, 2007 at 14:01 |
Ericjb Active Member |
Joined: Posts: | February 2004 655 |
|
|
Make sure the original remote has new batteries in it.
Try it from different distances, too much/too little IR can be a problem.
What device is it you are having trouble with? Some remotes are trickier than others.
|
There are 10 types of people in this world, There are those who understand binary, and those who don't! |
|
Post 3 made on Tuesday December 18, 2007 at 09:25 |
QueK9 Lurking Member |
Joined: Posts: | December 2007 5 |
|
|
Same problem with the Mediagate 350 HD
|
Houston we have a problem... |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.