Post 1 made on Tuesday January 7, 2003 at 12:52 |
ZebertT Long Time Member |
Joined: Posts: | December 2002 31 |
|
|
My Panasonic PT-45LC12 TV has the following inputs (in order): Tuner Line1 Component1 Component2 RGB
When I set these up, the Activity Wizard insists that Component1 needs a channel number (like a tuner input) which is incorrect. I've tried recreating the TV but have the same problem. Note that these inputs are not the ones listed in the harmony database (which seems to be incorrect).
How do I fix this?
Thanks, Todd
|
|
Post 2 made on Tuesday January 7, 2003 at 14:46 |
GunTeach Long Time Member |
Joined: Posts: | January 2003 33 |
|
|
Sounds like a problem I am having where the Harmony DB is doing something it should not. Do you know what the device is that Harmony wants to use? And what the third input for that device is? I am thinking that even when you overide the list, the wizard is not. You might need to directly exit the XML on this one.
Contact Harmony directly for their help. (be prepared to wait - they are running about 7 days behind at the moment.)
|
|
OP | Post 3 made on Tuesday January 7, 2003 at 17:01 |
ZebertT Long Time Member |
Joined: Posts: | December 2002 31 |
|
|
The database has exactly that TV but with the following inputs:
Tuner Component1 RGB
|
|
Post 4 made on Tuesday January 7, 2003 at 20:05 |
I had a similar problem (Remote insisting on channel number) a while back. here is the response from Harmony Customer service: (I replaced the < with ( etc)
Any input with TV, Tuner, Antenna, Ant or cable in the name is assumed to be a Tuner type input and so when using this input we ask for a channel number. To work around this it is possible to manually modify the XML for an activity and remove the "SetChannel" code. If you would like to do this for your 'Watch TV' activity then follow these instructions: a) From your Harmony Member home page select the 'Edit this Activity' link next to your 'Watch TV' activity. b) From the next page select the link 'Modify the XML for this Activity'. c) Remove the following lines of XML:
(SETUP) (DEVICENAME)4840(/DEVICENAME) (OPERATION)SetChannel 3(/OPERATION) (/SETUP)
(PARAMETER) (NAME)Channel(/NAME) (VALUE)3(/VALUE) (/PARAMETER)
d) Save your changes by clicking the 'Change>' button. e) Update your Harmony Remote.
I hope this fixes your problem - it worked for me.
|
|
OP | Post 5 made on Tuesday January 7, 2003 at 21:04 |
ZebertT Long Time Member |
Joined: Posts: | December 2002 31 |
|
|
Ah ha!
I guess I should have been more specific, my inputs are: Line1:VCR Component1:Cable Component2:DVD
The "cable" was the culprit. I've changed it to "CBox".
Thanks!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.