Post 1 made on Friday December 6, 2002 at 23:20 |
starone Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
Dead SST 768 - Well got my NEW 768 today in the mail and set up the software and went to the web site set up all the remotes, so far so good - tested the unit it worked fine - went back in to the web site did a down load and now nothing works - worked on it for 2 hrs down loaded software upgrades - firmware upgrades - it seams to do process the upgrades just fine - I tryed using my old remotes and sent data back to Harmony and that worked fine - deleated everything from the web site and the unit and started all over - and tryed to probram just ONE thing and says it its downloaded and I see the new information in the display - but I get NO responce from any of the AV hardware. I'm hoping I can get some help
Dennis
|
|
Post 2 made on Saturday December 7, 2002 at 16:09 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,875 |
|
|
are you sure the commands are learnt correctly? With some camcorders, if you point a remote at the camcorder and press a button on the remote you will see the flashing light on the cam. Try it with a remote that you know should work, and then try it with the harmony.
|
... |
|
Post 3 made on Saturday December 7, 2002 at 16:15 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,875 |
|
|
I guess I am a bit late :-)
|
... |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.