| Post 1 made on Monday January 24, 2000 at 09:04 |
I have this installed in my pc, (creative drive + card) and I cannot get a picture, whatever I try .. the DVD appears to play alright, but the screen is always blank.
How should all this be connected up?
thanks
|
|
| OP | Post 2 made on Monday January 24, 2000 at 15:40 |
Daniel Tonks Historic Forum Post |
|
|
I'm assuming you have the jumper cable from your video card to the DXR3 installed, then your monitor into the DXR3? And all drivers are installed properly? It should work.
|
|
| OP | Post 3 made on Thursday January 27, 2000 at 12:17 |
ah, that will be the problem then. How do you connect the cards together?
thanks
John
|
|
| OP | Post 4 made on Thursday January 27, 2000 at 21:20 |
Daniel Tonks Historic Forum Post |
|
|
Should be in the manual. There's a short cable that goes from your current video card to the DXR3, then your monitor plugs into the DXR3. You won't see anything the DXR3 is doing unless you have that cable connected and your monitor plugged into it.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
