Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Denon AVR-X1700H and RC-1244 remote control
This thread has 4 replies. Displaying all posts.
Post 1 made on Tuesday March 14, 2023 at 11:48
CrazYoshi
Junior Member
Joined:
Posts:
March 2023
3
Hi,
I'm looking the HEX or the RAW command to power ON/OFF the AVR-X1700H.
So far, I wasn't able to find the correct string.
Is there anyone that was able to get the code for this remote?

Thanks!
Post 2 made on Tuesday March 14, 2023 at 19:47
Dundas
Founding Member
Joined:
Posts:
April 2002
332
Try these, I think both versions should work. Let us know.

New Receiver Codes:
ON
0000 0070 0000 0032 0080 0040 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0ACD

OFF
0000 0070 0000 0032 0080 0040 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0010 0010 0ACD


Older Receiver Codes:
ON
0000 006D 0000 0020 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0679 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0679

OFF
0000 006D 0000 0020 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0679 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0679
OP | Post 3 made on Wednesday March 15, 2023 at 07:10
CrazYoshi
Junior Member
Joined:
Posts:
March 2023
3
Thanks for your quick reply.
I've tried both ON codes but none of them worked.

I'm using a Xiaomi Miio smart remote and it is powering on the AVR correctly using their app but I'm not able to do the same using HomeAssistant.
I've tried to get the code using the learning functionality but it doesn't seems to work either (it worked for other IR devices).

Do you have any idea?
OP | Post 4 made on Sunday March 19, 2023 at 14:09
CrazYoshi
Junior Member
Joined:
Posts:
March 2023
3
Hi,
I've finally figure it out using the following:
Power ON:
0000 006D 0040 0000 000B 001D 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 06F5 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 0655 000B 001D 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 06F5 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 0655

I have to repeat the same code twice within a second to turn my AVR on.
Post 5 made on Monday March 20, 2023 at 09:01
Barf
Long Time Member
Joined:
Posts:
August 2013
362
The first four signals are, in order, Denon-K: {D=4,S=1,F=2},
Denon-K: {D=4,S=1,F=3},
Denon: {D=2,F=225} and
Denon: {D=2,F=226} (using IrScrutinizer).

The final one is a bit funny: It consists of two copies of Denon: {D=2,F=193}, as an intro signal.
Instead, the Denon signal consists of a repeat signal, with no intro. The funny-ness of your signal is probably due to imperfect learning software. The "normal" Denon D=2,F=193 looks like

0000 006D 0000 0020 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0677 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0677

Try it, I believe it should work if you hold down the key for half a second or so.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse