Below is the code from the files section of this webpage. I am unable to get it to work with the WS65905 TV. The codes for Inputs 1-4 work great but this one seems to have no effect. Can anyone help?

Input 5 (Component)
0000 0080 0011 0011 000a 0045 000a 0045 000a 0045 000a 001e 000a 001d 000a 001d 000a 0045 000a 001e 000a 0045 000a 001d 000a 001d 000a 0045 000a 001e 000a 0045 000a 0045 000a 001e 000a 0342 000a 0045 000a 0045 000a 0045 000a 001d 000a 001d 000a 001e 000a 0045 000a 001d 000a 0045 000a 001d 000a 001e 000a 0045 000a 001d 000a 0045 000a 0045 000a 001e 000a 033f

You might try this. It is the same command but not repeated twice and it is also identical to component 1 in the Rear Projection Mitsubishi TV's.

Otherwise, there does not appear to be anything wrong with it.

0000 007d 0000 0011 000a 0047 000a 0046 000a 0046 000a 001e 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 0046 000a 001e 000a 031d

HTH,

Jon

Try this
Use the Mits Remote. Set the layer button to TV then while holding the power button down enter the code 090. Then press input or device button in combination with the SQV button. This will give you the STB or Input 5. To return the remote to normal press and hold the power button and enter 000 or for netcommand code 935.

Good luck,

could not get either of these suggestions to work. Working with the remote got me Ant A. The code restructure yielded no change to the video input. Any other suggestions.

This message was edited by Yjones on 04/28/02 15:39.54.