Post 1 made on Saturday April 27, 2002 at 11:17 |
Below is the code from the files section of this webpage. I am unable to get it to work with the WS65905 TV. The codes for Inputs 1-4 work great but this one seems to have no effect. Can anyone help?
Input 5 (Component) 0000 0080 0011 0011 000a 0045 000a 0045 000a 0045 000a 001e 000a 001d 000a 001d 000a 0045 000a 001e 000a 0045 000a 001d 000a 001d 000a 0045 000a 001e 000a 0045 000a 0045 000a 001e 000a 0342 000a 0045 000a 0045 000a 0045 000a 001d 000a 001d 000a 001e 000a 0045 000a 001d 000a 0045 000a 001d 000a 001e 000a 0045 000a 001d 000a 0045 000a 0045 000a 001e 000a 033f
|
|
Post 2 made on Saturday April 27, 2002 at 17:32 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
You might try this. It is the same command but not repeated twice and it is also identical to component 1 in the Rear Projection Mitsubishi TV's.
Otherwise, there does not appear to be anything wrong with it.
0000 007d 0000 0011 000a 0047 000a 0046 000a 0046 000a 001e 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 0046 000a 001e 000a 031d
HTH,
Jon
|
|
Post 3 made on Saturday April 27, 2002 at 23:53 |
2MAV Founding Member |
Joined: Posts: | February 2002 2 |
|
|
Try this Use the Mits Remote. Set the layer button to TV then while holding the power button down enter the code 090. Then press input or device button in combination with the SQV button. This will give you the STB or Input 5. To return the remote to normal press and hold the power button and enter 000 or for netcommand code 935.
Good luck,
|
|
OP | Post 4 made on Sunday April 28, 2002 at 15:38 |
could not get either of these suggestions to work. Working with the remote got me Ant A. The code restructure yielded no change to the video input. Any other suggestions.
This message was edited by Yjones on 04/28/02 15:39.54.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.