Post 1 made on Monday December 8, 2003 at 13:25 |
htdcmike Long Time Member |
Joined: Posts: | February 2003 14 |
|
|
I have a job that is wired with RG-59 and there is no way to pull RG-6 without major work. Has any one tried using this with HD Sat and what were your results. Thanks in Advance for any comments.
|
|
Post 2 made on Monday December 8, 2003 at 14:31 |
Bruce Sinclair Active Member |
Joined: Posts: | April 2003 694 |
|
|
You may have a problem with signal weakness. RG 59 does not have the same capacity for bandwidth that RG 6 has
|
Bruce Sinclair CMB Integrations LLC DMC-E "Those who are most critical, often have no real skills themsevles" |
|
Post 3 made on Monday December 8, 2003 at 18:37 |
Shoe Founding Member |
Joined: Posts: | August 2001 1,385 |
|
|
|
Post 4 made on Monday December 8, 2003 at 21:13 |
NICKY6 Lurking Member |
Joined: Posts: | December 2003 7 |
|
|
100% rg59 is not for satellite but if u in a no other choice situation if the cable is 100% up to par and not old i have seen it work i would still find a way for rg6 if u can
and if u do use it check each transponder to check the signal strength if any are below 80% i would abort
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.