| Post 1 made on Wednesday August 20, 2003 at 12:26 |
tfuzz Lurking Member |
Joined:
Posts: | August 2003
2 |
|
|
Does anyone have a solution for Samsung DLP 43" & 50" discrete power and input commands? We have been working on this for 6-8 weeks. Samsung has been of no help!
Eric J please respond.
|
|
| Post 2 made on Wednesday August 20, 2003 at 13:32 |
Shoe Founding Member |
Joined:
Posts: | August 2001
1,385 |
|
|
If you have a HLM or HLN model there were no discrete codes for those models. Samsung had an upgrade program which was supposed to cost $200 and be performed in home by qualified dealers but you needed to be signed up by July 31. I have not "heard" of any completed upgrades. You should check with your dealer. Here is the link [Link: samsungusa.com] The news is not good.
|
|
| OP | Post 3 made on Wednesday August 20, 2003 at 13:48 |
tfuzz Lurking Member |
Joined:
Posts: | August 2003
2 |
|
|
We have worked with a Samsung authorized service technician and installed the upgrade. We still don't have discrete codes to be able to send to the TV!
|
|
| Post 4 made on Wednesday August 20, 2003 at 15:40 |
Shoe Founding Member |
Joined:
Posts: | August 2001
1,385 |
|
|
I usually move on at this point but being that I am on an extended vacation and quite mellowed out I will point out there is a ccf in the files section that has discrete codes. Of course you'll have to test them to make sure they'll work. Let us know how they perform.
|
|
| Post 5 made on Wednesday August 20, 2003 at 20:43 |
barjack15 Lurking Member |
Joined:
Posts: | August 2003
8 |
|
|
I tried the discrete CCF on the HPN6339 plasma, as all the other codes from the DLP models work on this plasma. The only discretes that worked were the power "on" and "off". I would love to find working discrete codes as well. I will be using this plasma in a system being controlled by a Crestron CP2E with a 1700c panel. I will have to resort to some very expensive alternatives in order to make this thing work.
|
|
| Post 6 made on Wednesday August 20, 2003 at 22:41 |
Shoe Founding Member |
Joined:
Posts: | August 2001
1,385 |
|
|
The plasma rs232 codes should work for a Crestron control system. I did a search on the Crestron group over at Yahoo and there were numerous threads that were more than I wanted to tackle. The IR codes for the HLN617 in the files section is not supposed to control the plasma
This message was edited by Shoe on 08/21/03 17:41.
|
|
| Post 7 made on Sunday August 24, 2003 at 00:40 |
Snackeroo Lurking Member |
Joined:
Posts: | August 2003
1 |
|
|
Yeah i have the same problem,i ended up making a video button with a built in macro video,up,enter and pasted it on every page adn its works ok
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
