Post 1 made on Monday August 11, 2003 at 13:34 |
Rob Grabon Founding Member |
Joined: Posts: | November 2001 1,392 |
|
|
Looking for RS232 control codes for a 32FD9954 Philips plasma for discrete on and off.
The IR codes that I found here and from Philips' web site only function for input. The set will turn on with an input IR but is unreliable in this manner.
Philips tech support has been less than helpfull after the run around of call this call that I was told they are not ready to release them at this time. Any help appreciated.
Thank You,
Rob Grabon
|
Technology is cheap, Time is expensive. |
|
Post 2 made on Monday August 11, 2003 at 14:42 |
AndrewZ Long Time Member |
Joined: Posts: | December 2002 94 |
|
|
Rob, does it mean that the "known" discretes don't work? ON - RC5, device 0, command 63 OFF - RC5, device 0, command 61
|
|
Post 3 made on Tuesday August 12, 2003 at 11:10 |
AVDesignPro Active Member |
Joined: Posts: | August 2003 598 |
|
|
I had no luck with the discrete on/off for that plasma at all. It has a ridiculous power sequence and would not reliably turn on & off.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.