Post 1 made on Saturday May 17, 2003 at 07:12 |
Brian D'Souza Lurking Member |
|
|
Pronto works great in IR but does not respond in RF mode. CH and ID are all checked and double checked. It has responded once or twice but that's it. Could it be Pronto needs firmware update or maybe something is wrong with it. I have tried 2 RFX modules and doesn't work with either. Thanks for any input.
|
|
Post 2 made on Sunday May 18, 2003 at 09:53 |
BruceHinton Founding Member |
Joined: Posts: | January 2002 47 |
|
|
The overall "system properties" setting to RF enabled did not do the same to the individual devices on a customer unit I was working on. I was focused on the IR router and missed it way too long. That is not a global command. Go to each device and re-set to "RF enable" in their properties box.
hope this helps.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.