Post 1 made on Thursday January 23, 2003 at 17:17 |
jefzone Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
Hi there: I have an unusual situation of needing to control a TEAC R-H300 cassette deck via Crestron control system. The deck is normally part of a Reference 300 system, and has a 3.5mm jack in the rear to receive remote control data. There is no IR window, apparently, IR is received by a component receiver, then data is transmitted to the deck.
Anyone have any idea how I can find out what codes to program into Crestron system? I only have the deck..no receiver..no IR remote.
Any help would be greatly appreciated.
Thanks
|
|
Post 2 made on Thursday January 23, 2003 at 19:24 |
Tony Golden Founding Member |
Joined: Posts: | August 2001 654 |
|
|
You could call Xantech's tech support, to see if one of these will work -- [Link: xantech.com]You may also want to post this question on the Crestron Programmers group, at [Link: groups.yahoo.com]
|
|
Post 3 made on Thursday January 23, 2003 at 21:37 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
What's the remote control model number?
|
|
OP | Post 4 made on Friday January 24, 2003 at 12:47 |
jefzone Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
Hi Tony:
Thanks for response. I'll check them out.
Jeff
|
|
Post 5 made on Friday January 24, 2003 at 16:39 |
Matt Founding Member |
Joined: Posts: | August 2001 1,802 |
|
|
I can help you out if you can give me the remote controls model number.
|
|
OP | Post 6 made on Monday January 27, 2003 at 12:01 |
jefzone Lurking Member |
Joined: Posts: | January 2003 8 |
|
|
Matt: I don't have the remote control. I'll try to find out the remote's model # from TEAC.
Thanks
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.