|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Future Remote This thread has 9 replies. Displaying all posts. |
|
Post 1 made on Friday December 31, 2010 at 13:13 |
Does anyone have an opinion on what remote would replace the TSU's when they are no longer available. Are there any other makes that incorporate IR, WiFi and RF currently.
|
|
Post 2 made on Friday December 31, 2010 at 17:32 |
alpha Long Time Member |
Joined: Posts: | September 2003 258 |
|
|
I was thinking about an IPAD . I don't know if it can do RF. The IR and WI-FI can be done with accessories and there is an attachment to give it hard buttons. The same can be done for the I-PHONE and I-POD TOUCH.
|
Project Boredom 2 is here. [Link: mediafire.com]------------------------ Check Version 1 & 2 out in the files section. |
|
Post 3 made on Friday December 31, 2010 at 19:37 |
michaelpremote Long Time Member |
|
|
What s/w would you use with that? I've been thinking alot about this. I'm not a programmer ie don't use prontoscript, but using the pep s/w I'm able to configure my TSU9600 (and RU990 / 7500) for my system. I can make adjustments, add components, channel icons etc as needed. I don't need to get someone else to do it!!!
I've looked a little at the other options such as RTI (don't know if diy'ers can have the s/w) and logitech (doesn't give you the customisation).
On the h/w side, for me, the ipad's too big, esp. without hard buttons, and the touch is a touch too small :-)
|
|
Post 4 made on Friday December 31, 2010 at 21:58 |
caseyse Long Time Member |
Joined: Posts: | April 2010 18 |
|
|
The future remote for me was to purchase two TSU9800s on Amazon as spares. Pronto does everything I need at the moment, and as far as I can project, into the future as well. It's too bad the division didn't meet Philips' revenue goals.
|
|
Post 5 made on Friday December 31, 2010 at 23:04 |
SJHart Long Time Member |
Joined: Posts: | December 2003 383 |
|
|
I'm sticking with my all Pronto setup (9800/9600/9400s plus several extenders) in our home. However, I'm also fiddling around with iRule (plus extenders). Might be good as a second option for the family (working in parallel with our Prontos).... Not nearly as integrated as the prontos, but something to keep me busy in 2011. Happy New Year! SJ
|
|
Post 6 made on Saturday January 1, 2011 at 05:39 |
lscolman2 Long Time Member |
Joined: Posts: | July 2003 216 |
|
|
I'm also sticking with the Pronto line. I recently upgraded to the TSU9800, from a TSU9600. Just because there will be no official support, doesn't mean they will stop working, and if you pick up spares from ebay, you are set for life. The current firmware and Prontoedit are very stable, and you can get all the help you need on here.
I have an Ipad, and the interface is wonderful, but the lack of hard buttons kills any chance it has of replacing the Pronto for me. There are a lot of nice apps being written for the Ipad, such as IP control for Denon 11 series amps, and TV Guide apps, but for control of my AV kit, there is nothing comes close to the flexibility of the pronto.
Cheers, Lee
|
|
Post 7 made on Saturday January 1, 2011 at 10:54 |
It's an interesting question. I've had Pronto's for over 10 years when I purchased my first SBCRU940. I'm currently running with a TSU9600/RFX9600 combo at home, and have sold the Pronto range to clients, as well as URC and Nevo remotes in the past/present. I don't like the NevoStudio or CCP software nearly as much as ProntoEdit (but that may because I have used it far less), and as michaelpremote said the Logitech software is for those who really want a DIY remote with what seems to be little customisation. Saying that I also started installing Control4 this year and as a one room solution it still works very well. The driver creation and lack of individual button customisation is very hard to get used to, and it really means you have to think way ahead of yourself to make sure the system does what you want, but clients do seem to like the interface. I also like the Zigbee mesh because the one thing that really bugs me about the Pronto is the Wi-Fi aspect and re-connection system from standby. The range of C4 drivers for two way control over things like AppleTV and Sonos is also growing all the time. I'm a salesman and not a programmer, and to be honest some of the stuff I read on the forums makes me realise how little of the Pronto I can actually take advantage of compared to some, but I am really sad to see it go after so long. I think I'll probably end up with Nevo as the S70 is a nice remote, but I've a lot more research to do before I discount URC completely.
|
TSU9600 RFX9600 Pronto Level 2 Certified |
|
Post 8 made on Saturday January 1, 2011 at 11:01 |
Barry Gordon Founding Member |
Joined: Posts: | August 2001 2,157 |
|
|
I have both an iPad and an IPod touch version of my Pronto system built using iRule. Nothing can match the Pronto either in developing the applications or being as feature rich graphically as the Pronto with the ability to handle two way communications. IMHO the only way to get the full graphic capability I desire is to have a fully programmable system such as prontoscript. Now that can be done on the i-XXX systems but you need to do it in native apple tools which will be daunting for a non programmer.
Having stated the above I am also following OpenRemote as they are taking the approach I have always used of having a central controller at least in the Theater and for Home Automation. I suspect that Android may dominate the tablet market because of its availability. Only time will tell
A Best Wishes and a Happy New Year to all.
|
|
Post 9 made on Saturday January 1, 2011 at 21:02 |
randman Long Time Member |
Joined: Posts: | June 2003 424 |
|
|
Upon hearing about Pronto closing down, I did some research on what alternatives are available for DIYers. I came to the conclusion that there were none as good as the Pronto line for DIYers. So, I bought 2 TSU9400s and a couple of remote extenders. All thes in addition to other Prontos I already have.
|
|
Post 10 made on Saturday January 1, 2011 at 22:13 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
On December 31, 2010 at 21:58, caseyse said...
The future remote for me was to purchase two TSU9800s on Amazon as spares. Pronto does everything I need at the moment, and as far as I can project, into the future as well. It's too bad the division didn't meet Philips' revenue goals. I did that bought another for spare.
|
Thanks
Frank |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|