Finally got the essentials software, configured everything with success, but could not make the 2way script work. I am sure the lutron part is fine because the iphone app controls everything.

The parametres are well confugured as well as all the buttons declared in the widgets page.

The TSU9800 is on the same router the main repeater is and all the web modules are working. I tried several different buttons and devices IDs on my system, but with no luck.

The system responds perfectly to telnet commands via computer, for example

#OUTPUT, 4, 1, 100 - that makes one of the dimmers go 100% on.

Am i missing something? The Ra2 module is the 1.12 downloaded from the pronto page.

Thanks in advance!

Couple of areas to look at :
Telenet login info, is it a mathc-script has pronto and pronto, lutron defaults are different
did you drop pronto script library for Ra2 into the system properties and check it as enabled?
Do the commands listed in the widgets page match the page in the script you are using? there are 2 default pages in the script, you must be using the correct ones in your widget list (page 1, page 2)that correspond to the page your buttons and feedback are on.

Tried everything but the obvious... The 9800 was running a 6.0.12 firmware, updated to 7.3.3 and Bam! Full 2 way communication. I wish everything else was as simple as that.