Checking my wireless networks with my laptop and see that I have 5 bars wireless B coming from the RFX9400, but on my TSU9600 I am not getting any bars of signal at all its just showing the RF tower with RF on top of it... is that normal or should there be bars of signal above that.....

It would seem that the problem lies in the remote here... what do you think...

The tower with the RF above it indicates that you have the TSU9600 and RFX9400 set to Stand Alone Mode (Ad Hoc Mode). This is where the TSU9600 and RFX9400 are communicating with each other directly via WiFi. You will only see the signal strength bars above the tower when the TSU9600 and RFX9400 are set to Network Mode. In Network Mode the TSU9600 and RFX9400 communicate with each other across your wireless network, wireless from the TSU9600 to your wireless router, then via ethernet or wireless from there to your RFX9400.

Thank you LP.... I appreciate your help... I was testing it out last night, and found I could still use it anywhere in the house, with no trouble....

I have not yet run my CAT5 for the 9400 to the network... But that will be next.

Other then that.... Im making progress programming... Slowly but surely..
Now If days were 48 hours long, I could get alot more stuff accomplished...