| Post 1 made on Monday March 9, 2009 at 15:49 |
Riccardo6886 Long Time Member |
|
|
Dear All,
I have a problem I would link to control the 8*8 matrix Creston DM-MD8x8 with my Tsu 9600. The system don't have IR and not Rs232 port, only a usb and ip port. Somebody know if it can be control via Usb/rs232 and in this case what are the rs232 command codes? In case the control should be done via Ip somebody have develop a program for the Tsu 9600 to control it?
Thanks,
Riccardo
|
|
| Post 2 made on Sunday March 15, 2009 at 15:40 |
thoupis Long Time Member |
Joined:
Posts: | August 2007
124 |
|
|
All Crestron equipment can only be controlled via a Crestron Processor. In real world of course, Crestron communicates with its' equipment via RS485 or IP which is a "closed" communication for the outside world. We have interfaced TSU9400 in an application for local TV controls and lights,music,curtains,sources being controlled via the Crestron system by sending serial strings over IP to the crestron and the crestron decoding it and making them into Crestron signals.
Demetris
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
