| Post 1 made on Monday January 5, 2009 at 06:27 |
Prylbogen Long Time Member |
Joined:
Posts: | February 2008
31 |
|
|
Hello,
I'm trying to develop some prontoscript for my TSU9600/RXF9600 enabling status feedback from my 905 amp through RS232.
The 905 sends status feedback whenever a property (volume, input, etc) in the reciever has changed. I can also send a query to the reciever for each property recieving an update on the status.
There is one command however that i don't recieve a correct status message for.
The HDMI OUT command seems to behave strange. According to the command spec it should work like this:
!1HDO00\r Turn off HDMI out
!1HDO01\r HDMI out main
!1HDO02\r HDMI out sub
!1HDOUP\r toggle between off/main/sub
!1HDOQSTN\r Query status
The first three commands works as excpected except i do not recieve a correct status respons. All i recieve is:
!1HDO\x1A when !1HDO01\x1A is excpected for out main. The data part seems to be missing from this property response. The same thing also applies on the query status.
Next strange thing is thet the toggle command (!1HDOUP\r) has to be fired twice rapidly to change the output. If fired once only thing that happens is that the status text of the current output is displayed on the TV or whatever is connected to the output for a couple of seconds.
I would realy like to be able to query the hdmi out on my reciever and wonder if this is a bug in the reciever firmware or if my reciever is faulty. Is there anyone in the forum with a 905 who could help me confirm this?
My firmware is:
Main Version 9 1.07/07Z26A
DSP1 07601A
DSP2 07518A
DSP3
07820B
HDMI 07706A
VIDEO 07606EO/
NET
1.01/070731z
Regards
|
|
| Post 2 made on Monday January 5, 2009 at 07:48 |
minimivic Long Time Member |
|
|
I have rs232 control of my 905/6 and I have 2 way volume control (sort of). I would be interested in this module if you get it working. I was hoping for an IP module of some sort.
Sorry no help though
|
|
| OP | Post 3 made on Friday January 9, 2009 at 11:39 |
Prylbogen Long Time Member |
Joined:
Posts: | February 2008
31 |
|
|
I will post here if i come up with something usefull. What i'm working on currently is very customized to my needs but if you have some knowledge on prontoscript you may be able to customize it for your needs.
I may use IP later on. But i'll stick to RS232 until i have everthing working.
Stilll no one here with a 905 being able to test if respons on HDO is working?
|
|
| Post 4 made on Friday January 9, 2009 at 11:57 |
Sunti Long Time Member |
Joined:
Posts: | April 2008
16 |
|
|
@Prylbogen - I will tested for you - I think Saturday or Sunday
Greets Sunti
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
