 |
 |
|
|
Philips Pronto Professional Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Strange issue with TV input codes after...
| |
|
| Topic: | Strange issue with TV input codes after conversion to PEP2 This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Saturday December 6, 2008 at 07:57 |
cutter74 Long Time Member |
Joined:
Posts: | March 2005
44 |
|
|
I've converted my config from PEP1 to PEP2 and have the following issue: I have a button on the front page that, when pressed, turns on the TV, the A/V receiver and switches the Input of the TV to AV2, then jumps to the Sat TV activity; pretty trivial stuff.
While this worked out just fine in PEP1, the same codes (clean database codes, not learned) in the same order, when used in PEP2 result in the following behaviour: When pressed, the TV and the AV/R switch on, but the input of the TV goes to "TV". If I press the same button again, the input goes to AV2 as it should but each time the button is pressed again, the input switches between TV and AV2. I've tried this with all input codes for my TV (AV1, AV3, AV4) and the behaviour is the same.
The interesting things for me are:
1) This behavior does not exhibit in PEP1, and
2) when each TV input code is pressed on its own, it doesn't switch back to "TV". Obviously a workaround would be to remove the TV "Power On" command prior to the input switch command but I would appreciate any ideas on what is causing this issue...
Thank you for your time.
|
|
| Post 2 made on Saturday December 6, 2008 at 11:57 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
13,006 |
|
|
Cutter,
Are you sure you are using the latest version of PEPV2 and the latest firmware? Also, could you be so kind as to tell us which remote?
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| OP | Post 3 made on Saturday December 6, 2008 at 12:18 |
cutter74 Long Time Member |
Joined:
Posts: | March 2005
44 |
|
|
I think I'm fully up to date. My remote is the TSU9400, the PEP version is 2.0.36.0 and the FW is 3.0.11. My TV is a Sony CRT KV32FX65-E, if it helps...
|
|
| OP | Post 4 made on Monday December 8, 2008 at 02:31 |
cutter74 Long Time Member |
Joined:
Posts: | March 2005
44 |
|
|
|
| Post 5 made on Monday December 8, 2008 at 08:32 |
nimnul Long Time Member |
Joined:
Posts: | August 2007
245 |
|
|
You need at least FW 5,06 to operate properly with PEP2
|
|
| OP | Post 6 made on Monday December 8, 2008 at 18:26 |
cutter74 Long Time Member |
Joined:
Posts: | March 2005
44 |
|
|
Actually, my FW is indeed the latest (6.0.21); I got mixed up before since I was looking at the setting page of my Pronto, where 3.0.11 is the version of the IR firmware.
|
|
| Post 7 made on Tuesday December 9, 2008 at 15:30 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Have you tried adjusting the duration of your IR codes?
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
