| Post 1 made on Friday February 16, 2007 at 08:23 |
ivan2001 Lurking Member |
Joined:
Posts: | February 2007
9 |
|
|
Hi!
I have a problem with making the RFX9600 to control my devices with RS-232. I tried to control Pioneer PDP-42MXE10 and Kramer VS808XL unsuccesfully. I have the codes from technical manuals, and I see the LED display on the RFX9600 blinking busy once I press the button. But there is nothing going on with the devices.
It seems that I'm doing something wrong, because the IR outputs are working just fine.
Does anyone have any suggestions on what am I doing wrong?
|
|
| Post 2 made on Friday February 16, 2007 at 09:19 |
miro711 Lurking Member |
Joined:
Posts: | February 2007
1 |
|
|
|
| Post 3 made on Friday February 16, 2007 at 11:49 |
ddarche Mr. RemoteQuest |
Joined:
Posts: | February 2002
2,309 |
|
|
Make sure you understand the wiring scheme for both sides of the RS-232, at the RFX9600 as well as the RS-232 input on your device. You may to switch wire 2 & 3 on one side.
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
| Post 4 made on Saturday February 17, 2007 at 18:36 |
remotecollector Long Time Member |
Joined:
Posts: | January 2006
140 |
|
|
also,make sure you have done the firmware update on the RFX9600. RS232 functionality is affected by the wrong firmware version and could be part of your problems.
|
|
| OP | Post 5 made on Monday February 19, 2007 at 03:13 |
ivan2001 Lurking Member |
Joined:
Posts: | February 2007
9 |
|
|
Thanks ddarche!
I have succeded controling the plasma. I didn't input the codes corectly. Does anyone knows the exact procedure how to input the hex codesfoe Kramer? For example: "01 81 81 81". Do I just write this in, or do I have to write something else?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
