Your Universal Remote Control Center
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Crestron Modules are now available for WolfPack Modular Matrix Systems
This thread has 2 replies. Displaying all posts.
Post 1 made on Friday August 14, 2020 at 13:44
Jim Christian
Founding Member
August 2001
Crestron Modules are now available for WolfPack HDMI Modular Matrix Systems.

HDTV Supply is pleased to announce that we have recently added Crestron Modules to support our WolfPack family of Matrix Systems that uses the RS232 as the control method. Setting up a Crestron system is usually not a DIY job and requires that you may have to go through an authorized Crestron dealer so contact Crestron for one in your area. You now have access to over 2,000 Different WolfPack Modular HDMI Matrix Switchers to choose from with Crestron Modules supporting 12-chassis sizes.

Most of HDTV Supplys WolfPack™ modular matrix system are capable of being controlled by various means via a Crestron system. The most reliable method is RS232 serial communication provided by the ports of nearly every Crestron processor. If your system does not have serial ports, they may be added(at a cost) to provide control to your HDTV(Wolfpack) matrix system. The modules were written, regression tested and run on models including PAC2m, Pro2, CP2e, AV2, and were site tested using a QM-RMC, an iPad mini and an inexpensive WiFi router and the modules will work for new and legacy Crestron systems. The site testing component is a control system that included the modules(driver) and macros with interface and code needed in front of the module/macro to simulate multiple control system(s) to demonstrate a proven product that HDTV Supply can endorse for you the consumer.

The SIMPl+ modules and macros provide all the functions of the Front Panel buttons and/or what the IR remote can do also, for a new or existing system. Everything except actuating the power switch that only a human hand can do. Configured properly, by a certified Crestron programmer, a Crestron control system typically is run at a home or commercial setting, but can also be accessed remotely through the internet, at an additional cost.

You now have access to over 2,000 Different WolfPack™ Modular HDMI Matrix Switchers to choose from with Crestron Modules supporting 12-chassis sizes:


These WolfPack HDMI Matrix Switchers with Crestron Modules feature:

•1 and 4-Port 4K HDMI In & HDMI out cards
•4K @ 30 Hz & HDCP 1.4 compliant
•IR Remote, Software, RS232 & Front Control
•From 9 to 16-Preset Scenes to Save/Recall depending upon matrix size
•Some with HDMI to CAT6 Extenders
•Some with Video Wall Functions
•Optional Color 7" Dual Displays
•Crestron Modules on 4x4 to 160x160

See all at:



If you need more information just call 833–WolfPack or 833–965–3722 to discuss your application.
Post 2 made on Sunday August 16, 2020 at 19:35
Super Member
March 2008
Assuming these will work with processors that haven't been discoed?
"Quality isn't expensive, it's Priceless!"
Post 3 made on Friday August 21, 2020 at 16:47
Greg C
Super Member
October 2002
Those processors listed are 2 generations old now. Don't think they will be my go to...
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse