Your Universal Remote Control Center
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Routing USB Webcam video/Mic audio through a DM system
This thread has 1 response. Displaying all posts.
Post 1 made on Thursday July 6, 2017 at 07:52
Lurking Member
July 2017
Is it possible to route a USB device (webcam/mic) that is connected to the USB HID input on a DM-RMC-SCALER-C through a DMPS3-300-C and out to a DM-TX-201-C USB HID port? I assume that if this is possible that it might have to be done in programming.
Post 2 made on Thursday July 20, 2017 at 19:25
Lurking Member
November 2012
USB on DM is only for USB HID, pretty much a keyboard and mouse. You might be able to do this with the USB-EXT-DM going thru the courtesy LAN port of the scaler and tx, but it is best practice to use a dedicated cat5 cable for this.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse