Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Setting Up Sonos Speakers with CCP.
This thread has 4 replies. Displaying all posts.
Post 1 made on Sunday January 31, 2021 at 08:38
shokwaverider
Regular Member
Joined:
Posts:
January 2021
98
I have been looking at programs from customer's remotes (MX-6000, 980, 990) that control Sonos speakers.

There appears to be no database selection for Sonos. What is the best practice for controlling them? Does one just learn the commands and create a dedicated node and button set?

I am looking to do it on a MX-880

Thanks in advance.
Post 2 made on Sunday January 31, 2021 at 11:33
PeterN
Active Member
Joined:
Posts:
July 2008
553
Most Sonos speaker products don't have IR control. If you have a Connect or Port connected to a receiver, you could program your CCP macro to do a receiver input switch and volume punch-through to the receiver's volume control, assuming the Sonos unit is in fixed volume output mode. But you won't be able to control the Sonos speaker directly.

Discrete codes for a Playbar are here on this very site (these codes may also work with Arc, Amp & Beam). Those Sonos soundbar products are also capable of learning IR codes of your choosing for some of their functions.
OP | Post 3 made on Monday February 1, 2021 at 17:27
shokwaverider
Regular Member
Joined:
Posts:
January 2021
98
Thanks for your response.
Post 4 made on Tuesday February 2, 2021 at 00:55
buzz
Super Member
Joined:
Posts:
May 2003
4,443
Sonos sound bars can be trained to respond to arbitrary Volume Up/Down/Mute IR commands. There is also an “Autoplay” function that will automatically switch play the input when the signal starts. Typically this works well, switching to TV audio as the TV is turned ON.

Newer bars will respond to CEC commands. Usually, CEC setup is automatic and the bar responds to TV Volume commands, however they arrive at the TV. In many cases the Bars can send numeric Volume confirmation back to the TV for display.
Post 5 made on Thursday April 22, 2021 at 00:37
Mark457
Junior Member
Joined:
Posts:
April 2021
1
On January 31, 2021 at 08:38, shokwaverider said...
I have been looking at programs from customer's remotes (MX-6000, 980, 990) that control Sonos speakers.

There appears to be no database selection for Sonos. What is the best practice for controlling them? Does one just learn the commands and create a dedicated node and button set [Link: facetimeapp.ltd] ?

I am looking to do it on a MX-880

Thanks in advance.

Make sure the content you're listening to is in DD 5.1! You can check the Sonos app (settings/system/about my system - scroll down 'Audio In'). For example, I realised my Chromecast doesn't output 5.1 so I needed to use the TV apps instead.

Last edited by Mark457 on April 22, 2021 23:40.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse