Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need help MX-6000 stuck on URC splash screen..
This thread has 4 replies. Displaying all posts.
Post 1 made on Monday September 2, 2019 at 20:59
mustang65
Lurking Member
Joined:
Posts:
January 2015
2
First things first. I am a URC DEALER in The Nashville Area and have ask URC for help with this issue and got know where on this topic. Tech support said there was nothing they could do to help with the issue because the remote is out of warranty. This is my personal remote.

So that being said Thanks in advance.....

So I have a MX-6000 that I was updating and now all I get from the remote is the URC splash screen. Can someone please give me a hand to get this back up and working.

I have looked all over the Internet and URC forum for a solution, but to no avail have I found no solution for this remote.

Tried the rest button on the bottom of the remote and mute and ok for 3 seconds but no go.

Thank you for any help you can give or solution

Mustang65

Last edited by mustang65 on September 2, 2019 22:35.
Post 2 made on Monday September 2, 2019 at 23:48
tomciara
Loyal Member
Joined:
Posts:
May 2002
7,958
It may be cooked.

Only thing I can think of is loading a blank configuration to it, if it will accept it.
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions.
OP | Post 3 made on Tuesday September 3, 2019 at 00:35
mustang65
Lurking Member
Joined:
Posts:
January 2015
2
I have tried CCP will not recognize the remote. i found a couple post on URC forums for the MX6000 but nobody explained what the fix was.

They just say oh I fixed it. But no explanation on how.

Thanks
Post 4 made on Wednesday September 4, 2019 at 10:38
tomciara
Loyal Member
Joined:
Posts:
May 2002
7,958
I’ve only done a few, but the one I had that exhibited your symptoms was not repairable. At that time, an MX5000 was the only available “replacement”, and that is now gone, AFAIK.
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions.
Post 5 made on Tuesday January 18, 2022 at 12:41
3space
Long Time Member
Joined:
Posts:
July 2005
30
This is exactly my situation. Was a dealer, personal MX6000, stuck on Splash Screen. I think it gets stuck before the routines are loaded that will interpret the command to go into setup mode. Windows Mobile Device Center does not see it. Does anybody else have any ideas on how to fix?
MX-5000, MX-3000 & MX-850 Remotes + MRF-350
Hitachi 55HDM71 55" Plasma Monitor, Samsung UN46C6500 LED TV, Samsung UN40C6300 LED TV, Yamaha RX-V2700 Receiver, Octava 4x4 HDMI/Cat6 Matrix Switch, etc.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse