|Post 1 made on Tuesday August 28, 2012 at 19:54|
Have a new client who's mx810i bit the dust (upon being tossed down the stairs by their kid ;)
Not familiar with this remote at all, other than knowing that it was URC's direct2consumer line and apparently used a harmony-like wizard interface for programming?
I was going to suggest replacing it with an mx880i or mx900i ... but I'm not sure what RF station the mx810i was designed to work with - would it typically have been deployed with an MRF260(i)? And if so, these should work with the 880/900, yes?
BTW, is it possible to copy the programming from one mx810 to another? The banged up remote apparently powers up, but won't send IR reliably; one option I was consdiering was having the owner purchase another mx810 (avail online), and then just assisting them with downloading/uploading the programming. Upon finding out it's a wizard-based programming, I though that the software may not even have a "download to PC/upload from PC" method?
|Post 2 made on Wednesday August 29, 2012 at 01:56 |
Any URC product with an 'i' in the part number uses 433Mhz RF. A MRF260i/MRF350i will work with any i remote.
Do your customer a favor and sell them a better remote than an 810. There's a very good reason they were discontinued.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.