| Post 1 made on Thursday March 15, 2012 at 12:45 |
MortiseMaker Lurking Member |
|
|
I changed the macro on the "Main" button from JUMP (Main) to
If (Press Time >= 1 second)
JUMP (Main/Page 2)
ELSE
JUMP (Main)
I reload the remote and press and hold the Main button for longer than 1 second. The result is that the remote is totally locked up and unresponsive until the battery is removed and replaced.
Next, I tried the following as the macro for the "Main" button:
Jump (Main/Page 2)
Now the result on first press of the Main button is a jump to page 1. Second press of the Main button jumps to page 2. Going to any other page and then pressing Main results in a jump to page 1 on the first press then a jump to page 2 on the second press.
Any ideas?
|
|
| Post 2 made on Thursday March 15, 2012 at 17:33 |
KVH Advanced Member |
Joined:
Posts: | December 2006
911 |
|
|
I haven't done an MX-1200 yet, but I've heard press and hold macros lock up the remote. Bug in the firmware is what's the cause and I'm guessing is also the culprit for your other issue.
|
All high's, all low's, it must be....... Einstein @ URC Control Room forum www.einsteinaudiosystems.com |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
