| Post 1 made on Saturday January 9, 2010 at 17:39 |
shidlerj Lurking Member |
Joined:
Posts: | January 2010
1 |
|
|
Just bought the above; want to use one MX-880 with two MRF-350's (with RF control), the first in one room (closed system A), another in a 2nd room (closed system B). Programmed the remote no problem, all devices set up, macros in place, with specific devices tied to their relevant MRF (RFID 0 for system A, and RFID 1 for system B). System A works like a charm, but system B doesn't at all. The MRF for B shows the signals are being sent (MRF and emitters light up appropriately), however all devices fail to operate on RF (however work perfectly with IR, telling me that the codes are correct). I've confirmed in the RF Control feature in CC that the devices are linked to the correct MRF, and that the emitters are in their correct corresponding plug ports. Help!!
|
|
| Post 2 made on Saturday January 9, 2010 at 18:23 |
Palnews26 Long Time Member |
Joined:
Posts: | April 2009
490 |
|
|
Never use RFID 0 as your final setting.
It's not a valid RF ID #
Its for interference testing only.
Change it to anything else for your final setup.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
