| Post 1 made on Wednesday February 6, 2008 at 18:59 |
evetsmd Long Time Member |
Joined:
Posts: | January 2008
17 |
|
|
Been having problems with a macro getting the 3808 to go to the FM or AM radio mode.
Using two Denon commands in my macro,
Tuner
Band FM
or
Tuner
Band AM
problem is it looks like the tuner command is a toggle and Band FM or AM after it has had no affect.
Tuner gets me into the radio mode but depending on how I exit the last time it just toggles to the other band. Band FM or Band AM seem to have no affect.
Any ideas or suggestions would be appreciated.
Thanks
|
|
| Post 2 made on Wednesday February 6, 2008 at 19:24 |
J.Todd Long Time Member |
Joined:
Posts: | August 2007
481 |
|
|
I have set the last 2 preset, 1 to a fm station and the other to a am station and then use the "G" "7" for am then "G" "8" for fm.
|
J.Todd |
|
| OP | Post 3 made on Thursday February 7, 2008 at 06:04 |
evetsmd Long Time Member |
Joined:
Posts: | January 2008
17 |
|
|
Thank You....I'll try your suggestion and let you know how I make out!
|
|
| Post 4 made on Thursday February 7, 2008 at 12:50 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,968 |
|
|
Often if you omit the TUNER command and just hit the FM or AM command, you are there....
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
