Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MX-900 Pioneer Power Discrete Reliability
This thread has 13 replies. Displaying all posts.
Post 1 made on Monday October 9, 2006 at 22:15
CCD
Super Member
Joined:
Posts:
August 2005
2,731
I programmed a remote for a client last week that has a strange problem. He has a Pioneer plasma that I do not know the model of, it is an all in one chassis unit mostly blackless than a year old. It is high on a wall and he has no clue. The unit was swapped from another model by Tweeter and he did not get a manual or receipt. I tried every codeset. Two work, toggle power works 100% of the time. Discrete off works 100% of the time. On works 10% of the time. Works 5 mins doesn't work for 20 mins very random. I think I read about this here before but I cannot find it in a search. Anybody remember this or better yet know the solution. I can think of a few ugly work arounds but I would rather "fix" the problem.
Post 2 made on Monday October 9, 2006 at 22:59
Loraquest
Long Time Member
Joined:
Posts:
June 2002
348
I have a 43" Pioneer Elite PRO-920 plasma. I experienced the exact same problem you are talking about and posted about it on these forums a while back:

[Link: remotecentral.com]

Unfortunately, I never solved the problem, and eventually decided to remove the discrete on command from my MX-850 altogether. To tell you the truth, I never tried any of the newer codes that are available now. For all I know, the bug has been fixed, but since you seem to be having the same issue, I suspect the problem lies in the TV's firmware. I'd be really interested to know if you figure out a solution.
OP | Post 3 made on Monday October 9, 2006 at 23:28
CCD
Super Member
Joined:
Posts:
August 2005
2,731
Thanks I knew I did not dream this. Have you tried: Power toggle followed by the discrete on? It seemed to always work right after I fired off the toggle power. Can you try it and let me know. It takes an act of congress for me to get in front of this set. It would not bother my client to have the tv flash off for a sec.
Post 4 made on Monday October 9, 2006 at 23:41
Tom Ciaramitaro
Loyal Member
Joined:
Posts:
May 2002
8,044
I wonder if it's like some of the JVCs where the command had to have repeats added in the RTI software and then learned back to URC. Although in that case the discretes did work when pressing the button, just not in macros.
OP | Post 5 made on Tuesday October 10, 2006 at 01:02
CCD
Super Member
Joined:
Posts:
August 2005
2,731
Nope. It just stops working for a while then starts again. It seems to work more than not after it gets the toggle power command. It does not matter if it is ina a macro string or not.
Post 6 made on Wednesday October 11, 2006 at 19:51
scottsol
Long Time Member
Joined:
Posts:
March 2006
17
I have an MXD with two sets of power discretes. The ones marked "new" not suprisingly work better with the last few generations of sets. Please email me so I can send you the file.
Post 7 made on Wednesday October 11, 2006 at 21:59
oex
Super Member
Joined:
Posts:
April 2004
4,177
i had this happen with a 4350 or 60. It was frustrating as hell. The set would stop responding to anything but the oem remotes toggle power. then all would be fine. I tried the urc codes and made a ccf with the hex from pioneers site with the same result. i did 1 4270 and havent experienced this yet. (Knocking ever so profusely on wood)
Diplomacy is the art of saying hire a pro without actually saying hire a pro
Post 8 made on Friday October 13, 2006 at 01:50
tweeterguy
Loyal Member
Joined:
Posts:
June 2005
7,713
Jed:

I have yet to find a pioneer (pro or pdp) that I can't control. Just about all work from the URC database and if not my old standby pronto hex gets me out of the bind. You may also try switching out of the current input before power off.

Plasma ON
0000 0067 0000 0022 0155 00ac 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 058f

Plasma OFF
0000 0067 0000 0022 0155 00ac 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 058f
OP | Post 9 made on Saturday October 14, 2006 at 21:54
CCD
Super Member
Joined:
Posts:
August 2005
2,731
Thanks, It is that model Tweeter sold about 6 months ago as a loss leader.
Post 10 made on Saturday October 14, 2006 at 23:11
tweeterguy
Loyal Member
Joined:
Posts:
June 2005
7,713
Ohhhh......you must be dealing with a PDP-42A3 or whatever it was branded by us. A definate TOAD (there was a bulliten sent out on the wire about it) and was never spec'd in for custom install, at least out here. Hmmm....maybe step cust. up to 950 and use variables?
OP | Post 11 made on Saturday October 14, 2006 at 23:39
CCD
Super Member
Joined:
Posts:
August 2005
2,731
CRAP! The Tweeter buyers as usual should be lined up and beaten with a rubber hose!
OP | Post 12 made on Thursday October 19, 2006 at 21:55
CCD
Super Member
Joined:
Posts:
August 2005
2,731
On October 14, 2006 at 23:11, tweeterguy said...
Ohhhh......you must be dealing with a PDP-42A3 or whatever
it was branded by us. A definate TOAD (there was a bulliten
sent out on the wire about it) and was never spec'd in
for custom install, at least out here. Hmmm....maybe
step cust. up to 950 and use variables?

PDP4350SX is the actual model. Does that help? Any body experience this?
Post 13 made on Thursday October 19, 2006 at 23:08
oex
Super Member
Joined:
Posts:
April 2004
4,177
are you sure no media box. the 4340/50/60 used a remote media box. I had a problem with a 4360. Real F in g PIA! I had the same problem and resolved it.
Diplomacy is the art of saying hire a pro without actually saying hire a pro
OP | Post 14 made on Tuesday October 24, 2006 at 01:25
CCD
Super Member
Joined:
Posts:
August 2005
2,731
On October 19, 2006 at 23:08, oex said...
are you sure no media box. the 4340/50/60 used a remote
media box. I had a problem with a 4360. Real F in g
PIA! I had the same problem and resolved it.

No media box. It is an SX not HD on the end.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse