Post 5 made on Sunday March 14, 2010 at 10:43 |
I used the following set-up codes for my Kenwood VR305 - 31313, 31570, 31569, 30042, 30186, 30239, 30313, 30314. I programmed the "AUD" button on my remote.
I did use the 995 command. I did the macro using the tv, cable, aud sequence. It worked for the tv and cable but not the aud. I then switched the macro to go cable, tv and aud. The same thing as before. The aud didn't work.
I used the 981 command and the remote blinked 4 times. I was able to re-program the tv, cable and dvd but no aud.
Any ideas. Thanks for the input so far.
|
|
|