| Post 4 made on Monday February 22, 2010 at 16:58 |
Razorback Lurking Member |
Joined:
Posts: | February 2010
1 |
|
|
I know this is an old post, but the question still applies. I'm wondering if this would work:
With the power off at the breaker, cut the black and white wires from the ballast.
Put a female plug on "power in" side of the black and white wire cut.
Plug an X-10 appliance module into the new female plug.
Put a male plug on the black and white wires coming out of the ballast and plug it into the appliance module.
Can't you now control this fluorescent unit via X10 remote (if the wall switch is left turned on)?
| |
|
|
