On January 19, 2010 at 16:05, rflores2323 said...
thanks for the reply. What I mean by add a command it that on some of the buttons there is no function prebuilt in the coded remote. For instance the record button does not have a function but I want to add a command to that record button for a function (i.e. play) just as an example.
There are three ways to get a command onto a button.
1. You can learn it from your original remote.
- Open the software
- Select "Tune Up"
- Select "Learn new commands from any remote control"
- Pick the device you want to learn into
- Click on each button that you want to learn over and click "Mark this button as bad"
- Click "Next" and the software will step you through learning all the buttons you marked as bad
2. You can copy the button from another device or activity
- Open up the software
- Select "Tune Up"
- Select "Copy a command from one device and paste it into another device or activity"
- Click "Next"
- Select the device or activity on top that has the function you want
- Click on the button that has the function you want
- Click "Copy Button"
- Select the device or activity on top you want to copy into
- Click on the button that you want to copy into to
- Click "Paste Button"
3. You can use the universal browser to import commands from this or another file.
-
