| Post 8 made on Monday January 22, 2007 at 14:47 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,999 |
|
|
The serial connector has RX, TX, and GND. In a straight-through connection, you will connect Pin 2 of a DB9 connector to the Wire for RX (or is it TX?) and Pin 3 to the wire for TX. Pin 5 is normally GND so you'd connect that there. If you find things are not working, simply switch the wires for RX and TX on the Phoenix connector.
| |
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
