I had been registered under this name 7-8 years ago, but I guess I was culled from the list for disuse...now reregistered.
Anyway, I've had my TSU9600 for a couple of days. I'm generally happy, although I could say something about the cheap, toylike ring around the cursor or the finicky USB connection. But I digress.
I had my XCF file ready to go when the remote arrived, having based it on my TSU1000 CCF file. It's worked generally smoothly, but I'm having an issue with controlling the volume on my Lexicon DC2 preamp/processor.
With the OEM remote, pushing the volume up button raises the volume by 1 db. Holding the button causes a continues increase until the button is released. It worked the same on my TSU1000, using a learned code.
But the same code imported to the TSU9600 causes jumps of 2-3 db with each push, and in a sloppy, inconsistent fashion. I tried the code in the database, but it behaves the same. I also tried varying the duration, but one can only set a minimum, not a maximum, and lengthening it just led to greater jumps in volume.
I tried learning the code into the 9600. I got varying results with each try, but eventually got a code which raised the volume by 1 db. Great, except it turns out that holding the volume button down doesn't produce a ramping up, just the 1 db change.
Any ideas for how I can reproduce the behavior of the OEM remote and the TSU1000 on the 9600?