OK I FIGURED IT OUT.. FINALLY !!! Hopefully this can help some others... There are 2 ways to get there the first is the best. At least in my case.

I'm using Cinemar's Mainlobby software w/ Global Cache

Direct Video inputs
video 1,2,3,4,5,6,7,8 & tuner

Example 1 (this is using the Discrete code but it needs to be written back to back, so your writing the the code twice.)

0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a

this is the code give here in remote central. Now just put a space at the end and paste it again. like so

0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a 0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a

Example 2 (this is by pressing the "ANT" button then the "TV/Video" button...)

to goto video 5 you would press the "ANT" button once then the "TV/Video" button 5 times. This is the same for all the inputs 1 - tv/video once, input 2 - tv/video twice and so on...

This is a goofy way sometimes cause if you hit the "ANT" button then slowly hit the "TV/video" and goto say input 5 and you want to go back to the tuner, you might be stuck in the ANT input so you have to hit the "ANT" button again... but if it went to the input just rite you can just hit the Channel up or down to go back to the tuner..This is the only way I can figure...


So I recommend the first example..

Thanks Lyndel & Paul