On March 11, 2008 at 20:16, tweeterguy said...
Excluding a programming issue (i.e. remote set to RF only
for that device and you were trying to test it via IR,
etc.) anything is possible. Not every device in the world
is in anyone's IR DB.
You could import the hex from this file which claims to
have the CC4000 device:
[Link: remotecentral.com]or
See my signature :-)
Thanks for the link, unfortunately those are RC5 codes and cannot be imported with the Univ Browser. I could download that into an old Pronto and use the Pronto into the MX980. But the customer reported they have finally found the factory remote, so I'll use that instead.
I can't believe URC's IRDB would not have one of the code sets that would work. I think there is something wrong with that portion of their DB (Marantz CDs).
And yes... it isn't an issue with RF or IR being turned off/on etc.. The flasher on the MSC400 is flashing, I've tried adjusting the gain in many ways to see if it's an IR intensity issue. I've done a million URC systems.... way past that part of trouble shooting.
