| Post 3 made on Sunday September 22, 2002 at 09:16 |
ECHOSLOB Founding Member |
Joined:
Posts: | February 2002
391 |
|
|
You always needed 13 volts going to the multiswitch. The directions never said to disconnect one of the voltages. One side from the 119 from you post it must be the 18 volt side but I don't recall from memory goes into the combiner along with a jumper from the 110 then back to the 18 volt side of the switch. In other words you always needed 13/18 volts nothing ever changed.
| |
|
|
