| Post 2 made on Wednesday May 21, 2003 at 00:51 |
jwalkup Founding Member |
Joined:
Posts: | December 2001
320 |
|
|
Mark
You need to let us know what other wires are in those boxes(and what they are connected to, and we need to know which wires are your "line"(120vac) & "load"(wire to fixtues/s)
To test for this, connect a voltage tester or test light, to the Copper Screw of the dimmer and to the ground screw, while testing turn the light on & off, if the tester goes on & off this is your "LOAD"
If it stays on it is your "Load"
John
| |
|
|
