On August 18, 2007 at 16:44, ottorommel said...
the codes to Command Mode 3 for the DVP-CX995V do
not work. The codes for Command Mode 3 actually are repeats
of Command Mode 2
I downloaded the sony-dvd-dvpcx995v.zip file for the Pronto,
downloaded ProntoEdit, and pulled the on and off hex codes
for all three modes for comparison. Even though it says
they are discrete codes, the on and off codes for CM 2
and 3 match each other so they are not discrete. CM 1
on and off are discrete.
I found that file and none of those six commands commands are discretes. What makes you think the CM 1 commands are?
All six of those functions are the power toggel function (21) documented here:
[Link: hifi-remote.com]1) You can use the MakeHex program to generate a complete set of Pronto Hex functions for any of the device codes listed in that page I mentioned. You can then use IrPanels or Hex2CCF to convert that to a CCF file for easy access from Universal Browser. That page includes discrete On and Off.
2) If you have CM 1 commands in Pronto Hex that work for any function missing from that web page, you can use the JP1 version of IrTool.exe together with DecodeIr.dll to decode it. The function numbers are the same across the three code sets, so once you get the decode in one code set, you have the signal (via MakeHex) in all three code sets.
