| Post 2 made on Thursday November 8, 2001 at 02:44 |
Larry Fine Loyal Member |
Joined:
Posts: | August 2001
5,002 |
|
|
Last question first: no. If you use only one cable from each dual LNB, you'll only get either even or odd channels. Multi-switches permanently set each LNB element to one polarity. Read my post in the Multi-switch and Cable thread.
Each receiver (or, more exactly, each tuner; dual-tuner receivers need two) will need only one cable.
You will need a multiswitch with two inputs for each dual-LNB. Sounds like you will need a 7-in/4-out switch. Good luck.
Larry
This message was edited by Larry Fine on 11/08/01 03:41.44.
| |
|
|
|
